Manufacturer:Proxxon
SKU:87-37160
Proxxon MICRO Chop and Miter Saw KGS 80. This is a neat addition to Proxxon’s Micro Family of Tools! The laterally moving saw head (Patent DP 103.18.479.1) prevents colliding of the saw blade with the vise jaws. This allows for a minimal gap between the work piece vise and the actual cut, which is vibration-free and leaves no burr. Base with round table of pressure-cast aluminum and CNC-machined guides and fittings.
By using the longitudinal fence stop (overhang 12" / 300 mm) and counter-rotating the table 2 x 45°, one can get the opposite angles for two equally long framing pieces by simply reversing them. Powerful, very quiet DC motor. Power transfer via quietly operating toothed drive belt. Complete with Carbide tipped saw blade 3 1/8" x 1/16" x 3/8" (80 x 1.6 x 10 mm), 24 teeth.
Technical data:110 - 120V AC. 200 W. 50/60 Hz. 6,000 rpm. Table area 9" x 9" (230 x 230 mm). Weight 12 lb (6 kg). Cutting capacity see chart below.
Saw head moves laterally making it possible to get extremely close to the vise holding the work piece when making the cut affording a vibration-free and burr-free cut.
With longitudinal fence stop (overhang 12" / 300 mm).
Ergonomically correct grip with integrated switch and saw head release mechanism.
Carbide tipped saw blade for non-ferrous metals, wood and plastics. Power transfer via quietly operating toothed drive belt.
Continuously adjustable (may be tightened in any position) round table mad of pressure-cast aluminum swivels 45° in both directions with positive stops at 15° intervals.
Integrated tightening mechanism with self-centering clamps. V-groove for round pieces. Front side groove for clamping thin work pieces.
--------------------------------------------------------------------------------
Cutting Capacity Chart:
Cutting capacity at 90°
(Perpendicular cut):
With material thickness up to
(in mm and inch) Maximum
material width
(in mm and inch) Maximum round stock diameter
(in mm and inch)
10mm 3/8"
18mm 11/16"
21mm 13/16"
25 mm 1" 65mm 2 9/16"
50mm 2"
40mm 1 9/16"
25mm 1"
Ø 25mm 1"
Cutting capacity at 45°
(Miter cut):
With material thickness up to
(in mm and inch) Maximum
material width
(in mm and inch) Maximum round stock diameter
(in mm and inch)
05mm 3/16"
10mm 3/8"
15mm 9/16"
20mm 3/4" 36mm 1 13/32"
30mm 1 3/16"
25mm 1"
18mm 11/16"
Ø 20mm 3/4"
The Proxxon MICRO Chop and Miter Saw KGS 80 comes equipped with a24 Teeth Carbide Tipped Saw Blade.
Optional Blades Available Below:
