A new generation of TDS-100 series of ultrasonic flow meter, heat meter, Superior performance, more powerful, using patented technology manufacturing.
TDS-100系列超声波流量计、热量表是在原款超声波流量计的基础上，集多年专业生产制造超声波流量计的技术与经验，采用TI的MSP430FG4618低功耗单片机，最新开发的一种通用型高性能、低价格、高可靠性，功能强大的超声波流量计。选用了国际上著名的半导体元器件厂商生产的最新、最先进的集成电路及微处理器等。硬件设计简单、软件功能强大和界面友好。采用低电压多脉冲平衡发射接收的专利技术，使其更能适应工业环境中的变频干扰，达到稳定、正确的工作。
TDS-100 series ultrasonic flow meter, heat meter is based on the original style of ultrasonic flowmeter, Set many years of professional production technology and experience in manufacturing ultrasonic flowmeter, Using MSP430FG4618 low power MCU TI, The latest development of a general-purpose high performance, low price, high reliability, Ultrasonic flowmeter is powerful. The internationally renowned semiconductor manufacturers latest, state-of-the-art integrated circuits and microprocessors etc.. Simple hardware design, software with powerful functions and friendly interface.The patent technology the balance of transmitting and receiving multi pulse low voltage, so that it can adapt to the variable frequency interference in industrial environment, achieve stability, work properly.
TDS-100系列超声波流量计可分为以下几款：
TDS-100 series ultrasonic flowmeter can be divided into the following paragraph:
TDS-100M模块式超声波流量计；
The TDS-100M module type ultrasonic flowmeter;
TDS-100H手持式超声波流量计；
TDS-100H portable ultrasonic flowmeter;
TDS-100P便携式超声波流量计；
TDS-100P portable ultrasonic flowmeter;
TDS-100F1壁挂式超声波流量计；
TDS-100F1 wall hanging type ultrasonic flowmeter;
TDS-100F2防爆壁挂式超声波流量计；
TDS-100F2 explosion-proof wall hanging type ultrasonic flowmeter;
TDS-100S盘装式超声波流量计
TDS-100S disc type ultrasonic flowmeter
TDS-100R超声波冷热量表
TDS-100R ultrasonic heat meter
二、产品特点 Product features
①硬件模块化设计，生产及维修操作简易；
The hardware module design, production and repair easy operation;
②内置4M字节数据记录器，可记录20万行定时输出或即时打印数据；
The built-in 4M byte data recorder, which can record 10000 for timing output or print data;
Electrical isolation of RS485 interface, including MODBUS, M-BUS, FUJI and other 10 kinds of communication protocol; 0-20mA or 4-20mA current loop output, Optional loop power supply (two wire), optional HART protocol;
With manual accumulator and batch controller function; Date cumulative recording function, The 512 day record before (day), Before 128 months (monthly) the cumulative flow and accumulation of heat and other data;
Record and check 32 times before the power failure time and other data; Interval can be set to a 24 hour automatic data recording or output function for a second, There are as many as 22 output content; three accuracy of analog input 0.1%;
⑦使用前请先了解产品的工作电源和型号，防止误接造成仪表不正常工作或损坏。
Please understand the working power supply products and models before use, To prevent the error caused by the instrument is not working properly or damaged.
三、技术参数 Technical parameters
1、主机 Host
①TDS-100M、TDS-100F1、TDS-100F2、TDS-100S固定式超声波流量计：
TDS-100M, TDS-100F1, TDS-100F2 ,TDS-100S fixed type ultrasonic flowmeter
测量精度：1%；
Measurement precision:1%
工作电源：隔离DC8~36V或AC85~264V；
The working power supply: The isolation of DC8~36V or AC85~264V;
功 耗：工作电流50mA(不连接键盘和蜂鸣器不响的条件下)；
Power consumption: Current 50mA (do not connect the keyboard and the buzzer does not ring conditions);
可选输出：1路标砖隔离RS485输出；
Optional output: The 1 sign brick isolated RS485 output;
1路隔离4~20mA或0~20mA输出（有源、无源可选）；
1 isolated 4~20mA or 0~20mA output (active, passive optional);
1 two-way serial peripheral interface, Can be directly connected to a plurality of such as 4-20mA analog output board through a series of forms, Frequency signal output board, thermal printers, data recorder and other external devices;
可选输入：三路4-20mA模拟输入回路；
Optional input: Three channel 4-20mA analog input circuit;
显 示：2×10汉字背光显示器（中英文双语可选择）；
Display: 2 x 10 Chinese characters backlight display (in English bilingual optional);
Other functions: Automatic memory before 512 days, 128 months before the, Before 10 years of positive and negative net cumulative flow automatic memory before 30 time, breaking time and the flow and can realize the automatic or manual feeding, and can be read by MODBUS protocol;
流量传感器：外夹式、插入式和管段式；
Flow sensor: The clamp type, insert type and pipe type;
Applicable to all kinds of sizes of pipe flow measurement, Flow velocity measurement range of 0.01 ~ + 32m/s, Measurement of medium is water, water, sewage, alcohol and other single stable liquid, Pipe material for steel, stainless steel, cast iron, PVC, steel and glass can be measured.
测量精度：优于1%；
Measurement precision: Better than 1%;
重复性：优于0.2%；
Repetition: Better than 0.2%;
工作电源：内置镍氢充电电池可持续工作10小时以上；
The working power supply: The built-in rechargeable Ni MH battery sustainable work more than 10 hours;
传感器安装方式：外夹式安装；
Sensor installation: Outer clip mounted;
显 示：4行汉子同屏显示瞬时流量、流速、累积流量、信号状态等；
Display: 4 men with screen display instantaneous flow, velocity, flow accumulation, signal status etc.;
信号输出：隔离RS232，可用于联网检测或导出记录数据；
The signal output: The isolation of RS232, Can be used for network detection or export data;
可选输出：OCT输出正、负、净累积脉冲信号和频率信号（1-9999HZ）可选；
Optional output: OCT output positive, negative, net cumulative pulse signals and frequency signals (1-9999HZ) optional;
可选配的传感器：外夹式，可即插即拔式接口；
The sensor can be selected: Clamp, which can plug and play interface;
Suitable for on-line liquid flow in the industrial field calibration and inspection measurement. Has the advantages of simple operation, high measuring precision, good consistency, The characteristics of online printing, battery power supply for a long time.
测量精度：优于1%；
Measurement precision: Better than 1%;
重复性：优于0.2%；
Repetition: Better than 0.2%;
工作电源：220VAC（标配），110VAC（可选）；
The working power supply: 220VAC (standard), 110VAC (optional);
测量周期：500ms(每秒2次，每个周期采集128组数据)；
The measurement cycle: 500ms (2 times per second, Each cycle, collecting 128 sets of data);
电 池：内置镍氢充电电池可连续工作24小时；
Battery: 24 hours of continuous work of built-in Ni MH rechargeable battery;
传感器安装方式：外夹式安装；
Sensor installation: Outer clip mounted;
显 示：2×10汉字背光显示器（瞬时流量、累积流量、信号状态等）；
Display: 2 x 10 Chinese characters (backlight display instantaneous flow, cumulative flow, signal status);
信号输出：隔离RS485；
The signal output: The isolation of RS485;
通讯协议：MODBUS协议，FUJI扩展协议，兼容国内其他厂家同类产品的通讯协议；
Communication protocol: The MODBUS protocol, FUJI protocol, compatible with similar products from other manufacturers of domestic communication protocol;
打印输出：内置热敏一体式打印机，实现实时或定时打印；
Print output: The built-in thermal one printer, real-time or timing print;
其他功能：自诊断，提示当前工作状态是否正常；
Other functions: Self diagnosis, prompt the current working state is normal;
可选配的传感器：外夹式，可即插即拔式接口；
The sensor can be selected: Clamp, which can plug and play interface;
④TDS-100R超声波冷热量表
TDS-100R ultrasonic heat meter
测量精度：2级，满足CJ128-2007《热量表》标准；
Measurement precision: Level 2, Meet the CJ128-2007 "" standard heat meter;
工作电源：隔离DC8~36V或AC85~264V或3.6V/19AH锂电池；
The working power supply: The isolation of DC8~36V or AC85~264V or 3.6V/19AH lithium battery;
温度范围：-40~160℃；
Temperature range: -40~160℃；
温差范围：3~75℃；
Temperature range: 3~75℃；
环境等级：B级或C级；
Environmental level: B or C;
可选输出：1路标准隔离RS485输出；
Optional output: 1 standard isolated RS485 output;
1 two-way serial peripheral interface, can be directly through the series connected in the form of a plurality of, Such as 4-20 mA analog output plate, frequency signal output board, thermal printers, data recorder and other external devices;
Other functions: Automatic memory 512 days ago, the first 128 months, before 10 years of positive and negative net cumulative flow; Automatic memory before 30 time, breaking time and the flow and can realize the automatic or manual feeding, and can be read by MODBUS protocol;
流量传感器：外夹式、插入式和管段式；
Flow sensor: The clamp type, insert type and pipe type;
温度传感器：PT100或PT1000铂电阻；
Temperature sensor：PT100 or PT1000 platinum resistance;
2、传感器 Sensor
①外夹式传感器：标准M型、S型、L型、SG型、MG型;
The clamp type sensor: The standard M type, S type, L type, SG type, MG type;
安装无需断流，无压力损失；
Installation without stop, no pressure loss;
精度±1%；
Accuracy of ± 1%;
安装维修方便，用户可自行安装；
Convenient installation and repair, a user can install;
价格最低，与测量口径有关；
The lowest price, with the measurement aperture;
适合于工况条件较好的环境；
Suitable for working conditions better environment;
②CR插入式传感器
CR Insert type sensor
安装无需断流，可带压安装，无压力损失；
Installation without interruption, with pressure mounting, no pressure loss;
精度±1%
Accuracy of ± 1%
用户需经培训后，采用专用开孔器才能自行安装；
The user must after training, the special opening device to install;
价格较高，与测量口径无关；
The price is higher, has nothing to do with the measuring aperture;
接收信号良好，长期运行稳定、可靠。
The received signal is good, long-term stable operation, reliable.
③管段式传感器
Pipe type sensor
安装需断管、断流，无压力损失
Installation of pipe break, break, no pressure loss
精度0.5%
The accuracy of 0.5%
安装维修需断流，用户可自行安装
Install the repair to stop, a user can install
测量口径越大，价格越高
Measurement of the larger diameter, the higher the price
精度最高，接受信号良好，长期运行稳定可靠
The highest accuracy, the received signal is good, long-term stable operation
