哈斯VF-2立式加工中心本身拥有30 x 16 x 20英寸 (762 x 406 x 508毫米) 的xyz行程，它的制造全部使用了美国制造的铸铁部件。和每台哈斯机床一样，VF-2代表了多年来持续不断的改进。客户的反馈以及对完美的不懈追求带来了进步和旨在改进设计的变革，直接结合到每日的生产线中。
哈斯VF-2是强有力的、占地面积小的立式加工中心，具有小结构机床的可靠性和精确度。VF-2拥有40锥度的主轴箱，由20马力的矢量双驱动（Y-Delta）马达驱动。VF-2在1400 rpm低转速下产生75英尺-磅的转矩，或在450 rpm和配备可选件2速变速箱的情况下，产生250英尺-磅的转矩，也可以在1.2秒内加速至7500 rpm用以加工铝。哈斯VF-2拥有大量标准特征和高生产率可选件（其中许多以打折后的套件来销售），它是当今最具价值的产品之一
• 100% ball bar testing before shipping:
Haas uses a stringent ball bar test that not only checks linear accuracy, but also the machine geometry. This ensures the three-dimensional squareness and accuracy of each machine.
• Through-spindle coolant:
The Haas through-spindle coolant options improve tool life and allow higher speeds, deep hole drilling and blind pocket milling. The result is high productivity and reduced cycle times. Haas engineers have designed a special seal which disengages when the system is not in use. This exclusive design feature extends the life of the system. The standard TSC option provides 300 psi (20 bar) at a flow rate of 1.5 gallons (5.7 L) per minute, and 250 psi (17 bar) at 4 gpm (15 Lpm). The 1000 psi option has a max flow rate of 6 gpm (23 Lpm), and requires separate (customer-supplied) 3-phase power. In both systems, actual pressure will vary with the diameter of the coolant passages in the tool.
• Programmable coolant nozzle:
Another unique time-saving feature from Haas. We noticed operators were constantly opening the doors of the machine to readjust coolant lines. P-Cool is a multi-position programmable nozzle that automatically directs coolant precisely at the part. The position of the nozzle is controlled via the program, saving operator time by eliminating constant adjustments.
可编程冷却喷嘴
Haas另一独特省时特色.我们注意到操作人员经常打开机床门来重新调节冷却液管。我们的P-Cool是多方位可编程冷却液喷嘴，可将冷却液自动精确地喷向零件，喷嘴的位置都由程序控制,节约了操作人员的时间,无需不断调整.
• 24-tool side-mount tool changer:
More tools, more work space and faster tool changes – together, these advantages will increase productivity and reduce setup times. Locating the tool changer outside of the work envelope frees up additional workspace, while adding greater flexibility when using large fixtures or rotary tables.
24刀位侧挂式刀库
侧挂式刀库提供更多刀具,更大工作空间与更快的换刀速度,这些优势将提高您的产能,减少准备时间.侧挂式刀库位于机床外壳之外,当与转台或大型夹具共同使用时,可释放更多空间,提供更大的灵活性.
Additional features include:
其它性能包括：
LED Beacon Light
The Haas-designed beacon light uses two rows of ultra-bright LEDS that can be seen from anywhere in the shop. The LEDs generate very little heat and have a life expectancy of more than 10 years.
LED警示灯
Haas设计的这一信号灯有两排超亮度LED - 12个绿色的和12个红色的 - 非常醒目，在车间的任何地方都可以很容易地看到。LED热量产生少，预期使用寿命达10年以上。
Color LCD Screen
Our full-color TFT LCD display is designed to work in the machine shop environment. The high-intensity, high-contrast LCD features a very wide viewing angle, and will not fade out in bright light. The panel is mounted behind anti-glare tempered glass for protection and easy viewing.
彩色液晶显示器
机床配置的彩色TFT LCD显示器设计适用于车间工作环境。高亮度、高对比度的液晶屏提供了非常宽的视角，且不会在明亮的光线下变淡。屏幕表面装有防眩强化玻璃加以保护。
Multi-FunctionJog Handle
Most machines use the jog handle only to move the axes around. On Haas machines, the jog handle can also be used in other modes to cursor through the program for faster editing, override spindle speeds and feedrates, or scan through offsets, parameters, etc.
多功能手轮
大多数机床的手轮只用于移动轴。Haas机床的手轮还可用于在其它模式环境中移动光标、快速编辑程序、改变主轴速度及进给速度或浏览偏置、参数等。
One-Button Features
Common multi-step functions, such as powering up in the morning or setting tool offsets, have been reduced to the push of a single button. Other often used functions, such as setting part zeros, homing the machine, setting the offset to centerline and resetting the tool turret, are also one-button commands.
一键性能
通常需多步进行的操作，如开机和设置刀具偏置，现在只需按一个键。其它经常用到的功能，如设置工件零点、机床回零和选择下一刀具均可采用一键式操作命令完成。
Dedicated Closed System
Our goal is to provide Haas users with a robust, dependable control that is seamlessly integrated with the machine. Our closed system is not reliant on PC-based controls or third-party NC suppliers. When you call Haas, you get a company that takes full responsibility for the entire machine
.
专用闭环系统
我们致力于为Haas用户提供强大可靠、与机床结合为一体的控制器。我们的闭环系统并不依靠基于PC机的控制系统或第三方数控系统供应商的产品。当您致电Haas时，我们会为整台机床完全负责。
Advanced Program Editing
A unique feature of the Haas control is an advanced program editor that allows the operator to edit programs in a dual-window format.
先进的编程系统
Haas控制系统的一个独特之处是其先进的编程系统，允许操作者在双窗口模式下编辑程序。
Dedicated Keypad
The Haas keypad has 131 keys. All common functions, including a full alphanumeric keypad, are clearly labeled for operator ease. If you have ever fumbled with hot keys, paging through screens looking for a specific function, then you will appreciate the simplicity of the Haas control. There are no encrypted codes to memorize, and many functions can be performed simply with the push of a single button.
专用键盘
Haas键盘有130多个键。所有通常按键，包括完整的字母键盘，都被明确标明，方便操作者使用。如果您曾费劲地寻找快捷键，在屏幕上逐页寻找某一特定功能，那么您将会发现Haas控制系统的简易性。不需要记忆任何密码，许多功能只需按一个键就可以执行。
Stainless Steel Bezel
Constructed of heavy-gauge T304 stainless steel with a fine-grained finish, the bezel of the Haas control not only looks great, it’s easy to clean, resists wear and will not corrode.
不锈钢框
Haas控制器的外框采用高规格T304不锈钢，且经过精加工。不但外形美观，而且易于清洁，耐磨损，抗腐蚀。（并非所有机床都提供）STANDARD CONTROL FEATURES, VF-2:
标准控制系统性能VF-2
• Fast, Powerful, Triple 32-Bit Control
快速强大三倍32-Bit处理器
• ISO Standard G-Code Compatible
与ISO标准的G代码相兼容
• One Button Auto Power-Up
一键启动
• Dedicated Keypad
专用键盘
• Standard G and M Codes
标准G和M代码
• Tool / Work Offsets:
刀具/工件偏置量测：
* One-Button Inputs
一键输入
* Cutter Compensation (radius / diameter)
刀具补偿（半径/直径）
* 200 Geometry / Wear Offsets
200个刀具几何尺寸/磨损偏置
* 105 Work Offsets
105个工件偏置
• Word Processor Editing
文字处理编辑器
• Program Review / Background Editing
程序浏览/后台编辑
• Mid-Program Restart
程序中途重启
• Advanced Pocket Milling (G150)
高级型腔铣削（G150）
• Helical Milling
螺旋铣削
• Mirror Imaging
镜像成像
• Graphic Program Review
图解程序浏览
• 1MB Program Memory
1MB 程序内存
• Multiple Calculator Displays
计算器显示
• Multi-Function Jog Handle
多功能遥控手轮
• One Button (G28) Rapid Zero Return
快速回零按钮（G28）
• Message / Alarm Display with History
历史信息/ 报警显示
• Tool Life Management
刀具寿命管理
• Tool Load Monitoring
刀具负载监控
• Electronic Thermal Compensation
电子热补偿
• Self-Diagnostics
自我诊断
• Machine Help Display
机器帮助显示
• RS-232 DNC Interface
RS-232 DNC接口
• USB port
USB接口
• 5 Spare M-Function User Interfaces
5个备用M功能
• 1-Year Parts and Labor Warranty
一年保修(零件和人工)
重型铸铁结构
20马力大功率(15千瓦)矢量驱动系统
高速无刷电机
双支承滚珠丝杠
出厂前100%球杆测试
高速主轴
主轴内冷
可编程冷却喷嘴
Additional features include:
STANDARD CONTROL FEATURES, VF-2:
