Super Vf-2基于经工厂验证的哈斯VF-2平台(30 x 16 x 25行程),标配有创新的12,000-rpm直接驱动主轴、超高速刀库和1400英寸/分的高速进给。独特的直接驱动系统直接把马达结合到主轴上,而不是皮带。震动、发热和噪音都比其它驱动系统低,因而能够提供更好的表面加工、热稳定性和非常安静的操作。新设计的24+1侧挂式刀库采用了更轻的材料和高性能伺服马达,换刀在不到1.5秒即可完成。所有轴上的高螺距滚珠丝杠和高转矩伺服马达提供了1400英寸每分钟的快速进给。
机床性能和优势VF-2SS
All features, benefits and specifications are subject to change.
所有机器性能,优势以及规格变化,不另行通知。
• 1400-ipm (35.6 m/min) rapids:
High-pitch ballscrews and high-torque, brushless servo motors on all axes provide rapids of 1400 ipm to keep non-machining time to a minimum. And with cutting speeds of up to 833 ipm (21.2 m/min), cycle times are significantly reduced.
1400-ipm (35.6 m/min)快速移动速度
• Hardened-steel bearing packs:
Haas uses hardened-steel bearing packs rolling on hardened-steel ways. Built using the same precision grinding technology utilized in bearing manufacturing, they feature zero clearance and full load-carrying capacity in all directions.
淬硬钢线轨
Haas uses only premium-quality ballscrews and guides that meet the highest quality standards in the industry. Haas ballscrews are anchored at both ends and pre-tensioned, then inspected for 100% parallelism to the axis guides.
Another unique time-saving feature from Haas. We noticed operators were constantly opening the doors of the machine to readjust coolant lines. P-Cool is a multi-position programmable nozzle that automatically directs coolant precisely at the part. The position of the nozzle is controlled via the program, saving operator time by eliminating constant adjustments.
• High-speed machining:
The HSM option provides a powerful tool to reduce cycle times and improve accuracy. Using a motion algorithm called ”acceleration before interpolation,“ combined with full look-ahead of up to 80 blocks, HSM provides fast contouring feeds without distortion of the programmed path. The Haas HSM option accepts ISO standard G code, and is a fraction of the cost of other high-speed controls.
高速加工
Haas HSM高速加工选项为缩短循环时间和提高精度提供了强大支持。高速加工选项使用被称为“插补前加速”的运动算法,加上能够预读多达80个程序块,可以让您快速进刀加工时,不会存在已编程路径失真的风险。Haas高速加工选项接受ISO标准G代码功能,且价格只是其它高速控制系统的一小部分。
• Remote Jog Handle:
Can be used to move all axes remotely during setup, as well as cursor through programs for faster editing, or scan through offsets, parameters, etc. When running a program, the remote jog handle can be used to override spindle and feedrate commands in 1% increments for the utmost in control. CYCLE START and FEED HOLD buttons allow the operator to single-block through a program from a vantage point closer to the part.
遥控手轮
遥控手轮可以在设置时,用来远程移动所有轴设置,以及在程序中作为光标来更快地进行编辑,或以偏置量,参数等来搜索。当运转一个程序时,遥控手轮可以用来改变主轴倍率和进给倍率,可控范围从1%倍率到极限。Cycle start 和 feed hold 按扭允许操作者在靠近工件的一个有利位置单步执行程序。