The Haas-designed beacon light uses two rows of ultra-bright LEDS that can be seen from anywhere in the shop. The LEDs generate very little heat and have a life expectancy of more than 10 years.
Our full-color TFT LCD display is designed to work in the machine shop environment. The high-intensity, high-contrast LCD features a very wide viewing angle, and will not fade out in bright light. The panel is mounted behind anti-glare tempered glass for protection and easy viewing.
彩色液晶显示器
机床配置的彩色TFT LCD显示器设计适用于车间工作环境。高亮度、高对比度的液晶屏提供了非常宽的视角，且不会在明亮的光线下变淡。屏幕表面装有防眩强化玻璃加以保护。
Multi-FunctionJog Handle
Most machines use the jog handle only to move the axes around. On Haas machines, the jog handle can also be used in other modes to cursor through the program for faster editing, override spindle speeds and feedrates, or scan through offsets, parameters, etc.
Common multi-step functions, such as powering up in the morning or setting tool offsets, have been reduced to the push of a single button. Other often used functions, such as setting part zeros, homing the machine, setting the offset to centerline and resetting the tool turret, are also one-button commands.
Our goal is to provide Haas users with a robust, dependable control that is seamlessly integrated with the machine. Our closed system is not reliant on PC-based controls or third-party NC suppliers. When you call Haas, you get a company that takes full responsibility for the entire machine.
A unique feature of the Haas control is an advanced program editor that allows the operator to edit programs in a dual-window format.
先进的编程系统
哈斯控制系统的一个独特之处是其先进的编程系统，允许操作者在双窗口模式下编辑程序。
Dedicated Keypad
The Haas keypad has 131 keys. All common functions, including a full alphanumeric keypad, are clearly labeled for operator ease. If you have ever fumbled with hot keys, paging through screens looking for a specific function, then you will appreciate the simplicity of the Haas control. There are no encrypted codes to memorize, and many functions can be performed simply with the push of a single button.
Constructed of heavy-gauge T304 stainless steel with a fine-grained finish, the bezel of the Haas control not only looks great, it’s easy to clean, resists wear and will not corrode.
FEED FUNCTIONS进给功能
Rapid Traverse Override 5%, 25%, 50%, 100% (key); or 1% increments via jog handle
快速移动倍率 5%, 25%, 50%, 100% (按键)；或1% 增量(手轮)
Feedrate Override 0% to 999%; 10% (key) or 1% (jog handle) increments
进给倍率 0% 到999%,;10% (按键)或1%(手轮)增量
Jog Handle Resolution 0.0001"/.001"/.01"/0.1” per handle division
手轮分辨率 0.0001”/.001”/.01”/0.1” 每摇一格
Jog Key Feeds 0.1/1.0/10.0/100.0 ipm
手动进给 0.1/1.0/10.0/100.0 ipm
Zero Return G28 (One key)
回零点 G28 (One key)
SPINDLE FUNCTIONS主轴功能
Speed Command S=1 to 7500 (10K, 15K optional)
速度命令 S=1 to 7500 (10K, 15K 可选)
Override 0% to 999% in 10% increments or
倍率 0%到999%在10%增量,或
1% increments via jog handle
1%增量(手轮)
TOOL FUNCTIONS刀具功能
Length / Wear Compensation 200 sets geometry and wear
长度/ 磨损补偿 200套,几何尺寸及磨损
Diameter / Radius Compensation 200 sets geometry and wear
直径/ 半径补偿 200套,几何尺寸及磨损
Length Measurement Automatic length storage
长度测量 自动长度储存
Life Management 32 sets with alarms
寿命管理 32套, 带有警报
Load Management 32 sets with alarms
载重管理 32套,带有警报
PROGRAMMING编程
Compatibility ISO standard G code
兼容性 ISO 标准G代码
Positioning Absolute (G90), incremental (G91)
定位 绝对值(G90),增量值(G91)
Canned Cycles 22 standard
固定循环 标准为22种
Circle Pocket Milling G12, G13
圆腔铣削 G12, G13
Bolt-Hole Drilling G70, G71, G72
系列钻孔 G70, G71, G72
Advanced Pocket Milling G150
高级型腔铣削 G150
Inch / Metric Switchable
英制/公制 可转换
Work Offset Coordinates 105 sets
工件偏置坐标系 105套
Part Zero Set Automatic input & storage
零件原点设定 自动输入和储存
M Code Outputs 5 spare user interfaces (may be used by options)
M代码输出 5种备用用户界面（或以选配使用）
2D Cutter Diameter Compensation G40, G41, G42
二维刀具直径补偿 G40, G41, G42
2D Cutter Length Compensation G43, G44,G49
二维刀具长度补偿 G43, G44,G49
3D+ Cutter Diameter Compensation G141
三维+刀具直径补偿 G141
DATA INPUT / OUTPUT数据输入/输出
Communications Port USB RS-232; 115,200 bits/sec (with ≤6’ cable)
通讯端口 USB RS-232; 115,200 bits/sec (with ≤6’ cable)
Memory Capacity 16 MB standard
存储能力 16MB标准
Max Number of Stored Programs 500
最多程序数量 500
Network Interface Options Ethernet, hard disk
网络接口选项 以太网,硬盘
所有Haas CNC机床都使用美国制造的铸铁构成, 它的减震能力超过钢铁十倍.Haas铸铁件内配有加强筋,以抗弯减震,同时,所有Haas铸铁件在加工前都要进行彻底检验,以确保没有裂纹.
可视快速代码编程系统可以使用已绘制的的界面轻松地创建G代码程序.从屏幕列表中选择一个操作,选择最符合你需要的模板,填入尺寸,速度,进给等.一旦所有信息填写完成并经过核实,可视快速代码会生成正确的G代码程序.有了这个对话式系统,每次复杂的零件可以被加工成一小部分.同样你可以从键盘上键入一个英文命令，如“主轴旋转”，这样正确地G代码将被替代进入到程序。
Haas独特的刀库采用正弦运动的操作臂来对往返运动加速或减速,防止了刀具与机器的碰撞.伞式刀库换刀器平稳可靠,使用寿命较长,且每把刀都可旋转到护罩外部自由加工。
出厂前100%球杆测试
其它性能包括：
• Fast, Powerful, Triple 32-Bit Control
