GR-512的59” x 146” (1499 mm x 3708 mm)固定工作台,能轻松支持大而重的工件。桥式结构能在提供低摩擦力和高度准确性且耐受力强的线性导轨上移动,行程可达整个工作台。这张1" (25 mm)厚的平整工作台能留出空间来允许作业,它由6061型号的铝做成,能承重达6000磅(2722公斤)。
有SAE或公制的配置可以选择-两者都是光洁的表面-这个59" x 146" x 1" (1499 mm x 3708 mm x 25 mm)钢制工作台面有1/2"–13的螺丝孔,孔间距为4”。 (公制为M12 x 1.75 ,孔间距100mm).总共有超过460个孔,使装夹更方便。
真空工作台
这个1英寸(25mm)厚,146" x 59" (3708 mm x 1499 mm) 6061型号的铝制工作台有个加工过的格栅。格栅与格栅的凹槽中心线的间距是2.25" (57 mm)。这个工作台被分为四个区域,纵向延着X轴方向,每个可以通过安全阀来手动开关。每个区域又细分为五块,可以敞开着或为了加工多个零件或为控制真空压力而塞紧。密封是由1/4" x 3/8" (6.35 x 9.5 mm) 的封条完成。包括100英尺(30.5m)的封条。封条可以被切割塞入需要密封的区域。但不包含真空泵。任何市场上提供的真空泵都可使用。(注:这个可选工作台不是为“自始至终加工”或弃板应用所设计。更多资讯请联系您的经销商。)
LED Beacon Light
The Haas-designed beacon light uses two rows of ultra-bright LEDS that can be seen from anywhere in the shop. The LEDs generate very little heat and have a life expectancy of more than 10 years.
Color LCD Screen
Our full-color TFT LCD display is designed to work in the machine shop environment. The high-intensity, high-contrast LCD features a very wide viewing angle, and will not fade out in bright light. The panel is mounted behind anti-glare tempered glass for protection and easy viewing.
Multi-FunctionJog Handle
Most machines use the jog handle only to move the axes around. On Haas machines, the jog handle can also be used in other modes to cursor through the program for faster editing, override spindle speeds and feedrates, or scan through offsets, parameters, etc.
One-Button Features
Common multi-step functions, such as powering up in the morning or setting tool offsets, have been reduced to the push of a single button. Other often used functions, such as setting part zeros, homing the machine, setting the offset to centerline and resetting the tool turret, are also one-button commands.
Our goal is to provide Haas users with a robust, dependable control that is seamlessly integrated with the machine. Our closed system is not reliant on PC-based controls or third-party NC suppliers. When you call Haas, you get a company that takes full responsibility for the entire machine.
Advanced Program Editing
A unique feature of the Haas control is an advanced program editor that allows the operator to edit programs in a dual-window format.
Dedicated Keypad
The Haas keypad has 131 keys. All common functions, including a full alphanumeric keypad, are clearly labeled for operator ease. If you have ever fumbled with hot keys, paging through screens looking for a specific function, then you will appreciate the simplicity of the Haas control. There are no encrypted codes to memorize, and many functions can be performed simply with the push of a single button.
Stainless Steel Bezel
Constructed of heavy-gauge T304 stainless steel with a fine-grained finish, the bezel of the Haas control not only looks great, it’s easy to clean, resists wear and will not corrode.