• 30-pocket side-mount tool changer:
The EC-2000 comes standard with a 30-pocket SMTC that handles tools weighing up to 30 lb (13.6 kg). Max tool diameter with all pockets filled is 4" (102 mm). With adjacent pockets empty, tools up to 10" (254 mm) diameter may be loaded.
• Powerful 30-horsepower (22-kilowatt) vector drive spindle:
The Haas-designed vector drive coupled with a high-precision gearbox produces the fastest, most powerful spindle output ever. This true closed-loop system doubles low-speed torque and accelerations. Maximum torque for the standard 30-hp (22-kW), 50-taper spindle is a robust 450 ft-lb (610 Nm) at 500 rpm.
• High-performance, two-speed gearbox:
All Haas gears are CNC machined and hobbed out of 8620 steel, then heat treated to 60 Rc and precision CNC ground to AGMA Class 13 quality. This massive, Haas-made gearbox provides plenty of torque for the heaviest cutting conditions.
• Hardened-steel bearing packs:
Haas uses hardened-steel bearing packs rolling on hardened-steel ways. Built using the same precision grinding technology utilized in bearing manufacturing, they feature zero clearance and full load-carrying capacity in all directions.
• 100% ball bar testing before shipping:
Haas uses a stringent ball bar test that not only checks linear accuracy, but also the machine geometry. This ensures the three-dimensional squareness and accuracy of each machine.
• 50-pocket side-mount tool changer:
The EC-1600 is available with a 50-pocket SMTC that yields a 51-tool capacity (50 in the carousel plus one in the spindle). The tool size and weight capacities are identical to the standard 30-pocket ATC.
• Sheet metal enclosure:
Keep your work area cleaner and safer with an optional enclosure. Heavy-duty, 14-gauge sheet metal keeps chips and coolant contained. The enclosure comes with wide doors and an open roof for extra-large parts. This option includes a coolant system with 80-gallon capacity, as well as dual chip augers.
• 30 hp (22 kW), 10K geared-head spindle:
This 10,000-rpm spindle for 50-taper machines provides a wide constant horsepower band, good low-speed torque for heavy cuts, and higher torque throughout the range above 500 rpm. (This option requires balanced tool holders with a G2.5 rating.)
• Through-spindle coolant:
The Haas through-spindle coolant options improve tool life and allow higher speeds, deep hole drilling and blind pocket milling. The result is high productivity and reduced cycle times. Haas engineers have designed a special seal which disengages when the system is not in use. This exclusive design feature extends the life of the system. The standard TSC option provides 300 psi (20 bar) at a flow rate of 1.5 gallons (5.7 L) per minute, and 250 psi (17 bar) at 4 gpm (15 Lpm). The 1000 psi option has a max flow rate of 6 gpm (23 Lpm), and requires separate (customer-supplied) 3-phase power. In both systems, actual pressure will vary with the diameter of the coolant passages in the tool.
• Visual Quick Code programming system:
Visual Quick Code uses a graphical interface that makes creating simple G-code programs almost effortless. First select the operation you want (e.g., bolt-hole circle or pocket milling), and then choose a part template from the display. VQC will prompt you to fill in part dimensions, speeds and feeds, etc., and then generates the G-code program for the operation. Modify the existing templates or create your own. VQC includes standard Quick Code as well – using a conversational interface, you can select English commands, such as ”spindle forward,“ from a menu, and the correct G code (M03 in this case) will be inserted into the program.
以太网选项
20GB硬盘提供了各项程序的巨大存储空间。可支持 ZIP™或闪存的接口。以太网可完成Haas机器与王网络或其它电脑间快速，简便的数据传输，大型文件可以被多台机器读取。可允许以每秒1000字组的速度对大型文件进行DNC。可用于Windows XP, ME, 2000 Pro & Server, NT 4.0, 98和95。IPX/SPX 或TCP/IP协议，可以方便地从控制屏幕设定。
标准规格
标准规格
100% ball bar testing ensures three-dimensional squareness and accuracy.
*Requires linear scales to achieve this accuracy.
Haas采用严格100%球杆测试.保证了每台机床的三维垂直度与精度.
需使用线性轨实现精度。
MACHINE DIMENSIONS, EC-2000机床尺寸
Note: Footprint drawing illustrates optional enclosure, which includes chip augers and
coolant system.
说明：以下是护罩选项的示意图，包括排屑器和冷却系统
装运尺寸
托盘尺寸 211" x 142" x 125" (5359 x 3607 x 3175 mm)
重量 35,850 lb (16,262 kg)
WORK ENVELOPE, EC-2000机床剖面图
Note: Max swing dimensions assume optional enclosure.
说明：最大回转直径（假设可选护罩）
正视图
G = max swing with front doors closed and table centered on X
G =前门关闭时到X轴方向工作台中心最大回旋距离
H = max swing with front doors open and table centered on X
H =前门开启时到X轴方向工作台中心最大回旋距离
H1 = max swing with front doors open and X axis 2" right of center
(toward operator)
H1 = 前门开启时到X轴方向工作台右边第二中心最大回旋距离（朝操作者方向）
WORK ENVELOPE, EC-2000 (cont’d) 机床剖面图
J = table surface to center of tool changer
J =工作台台面到刀库中心的距离
Note: Haas recommends anchoring all EC-2000 machines to a suitable foundation. Anchoring instructions and details can be found in Engineering document ES-0095.
LED Beacon Light
The Haas-designed beacon light uses two rows of ultra-bright LEDS that can be seen from anywhere in the shop. The LEDs generate very little heat and have a life expectancy of more than 10 years.
Color LCD Screen
Our full-color TFT LCD display is designed to work in the machine shop environment. The high-intensity, high-contrast LCD features a very wide viewing angle, and will not fade out in bright light. The panel is mounted behind anti-glare tempered glass for protection and easy viewing.
Multi-FunctionJog Handle
Most machines use the jog handle only to move the axes around. On Haas machines, the jog handle can also be used in other modes to cursor through the program for faster editing, override spindle speeds and feedrates, or scan through offsets, parameters, etc.
One-Button Features
Common multi-step functions, such as powering up in the morning or setting tool offsets, have been reduced to the push of a single button. Other often used functions, such as setting part zeros, homing the machine, setting the offset to centerline and resetting the tool turret, are also one-button commands.
Dedicated Closed System
Our goal is to provide Haas users with a robust, dependable control that is seamlessly integrated with the machine. Our closed system is not reliant on PC-based controls or third-party NC suppliers. When you call Haas, you get a company that takes full responsibility for the entire machine
Advanced Program Editing
A unique 性能 of the Haas control is an advanced program editor that allows the operator to edit programs in a dual-window format.
Dedicated Keypad
The Haas keypad has 131 keys. All common functions, including a full alphanumeric keypad, are clearly labeled for operator ease. If you have ever fumbled with hot keys, paging through screens looking for a specific function, then you will appreciate the simplicity of the Haas control. There are no encrypted codes to memorize, and many functions can be performed simply with the push of a single button.
Stainless Steel Bezel
Constructed of heavy-gauge T304 stainless steel with a fine-grained finish, the bezel of the Haas control not only looks great, it’s easy to clean, resists wear and will not corrode.
重型铸铁结构
高效能两级变速箱
完全第四轴性能
可视快速代码编程系统
其它性能包括：
