• Powerful 30-horsepower (22-kilowatt) vector drive spindle:
The Haas-designed vector drive coupled with a high-precision gearbox produces the fastest, most powerful spindle output ever. This true closed-loop system doubles low-speed torque and accelerations. Maximum torque for the standard 30-hp (22-kW), 50-taper spindle is a robust 450 ft-lb (610 Nm) at 500 rpm.
High-performance, two-speed gearbox:
All Haas gears are CNC machined and hobbed out of 8620 steel, then heat treated to 60 Rc and precision CNC ground to AGMA Class 13 quality. This massive, Haas-made gearbox provides plenty of torque for the heaviest cutting conditions.
• Double-anchored ballscrews:
Haas uses only premium-quality ballscrews and guides that meet the highest quality standards in the industry. Haas ballscrews are anchored at both ends and pre-tensioned, then inspected for 100% parallelism to the axis guides.
• Hardened-steel bearing packs:
Haas uses hardened-steel bearing packs rolling on hardened-steel ways. Built using the same precision grinding technology utilized in bearing manufacturing, they feature zero clearance and full load-carrying capacity in all directions.
• 100% ball bar testing before shipping:
Haas uses a stringent ball bar test that not only checks linear accuracy, but also the machine geometry. This ensures the three-dimensional squareness and accuracy of each machine.
50-pocket side-mount tool changer:
The EC-1600 is available with a 50-pocket SMTC that yields a 51-tool capacity (50 in the carousel plus one in the spindle). The tool size and weight capacities are identical to the standard 30-pocket ATC.
50刀位侧挂式刀库
EC-1600的50刀位侧挂式刀库可容纳51把刀(50把刀位设在刀库上,1把设在主轴上)。刀具的尺寸及载重等同于标准的自动换刀库水平。
• Sheet metal enclosure:
Keep your work area cleaner and safer with an optional enclosure. Heavy-duty, 14-gauge sheet metal keeps chips and coolant contained. The enclosure comes with wide doors and an open roof for extra-large parts. This option includes a coolant system with 80-gallon capacity, as well as dual chip augers.
金属板外罩
带有这个外罩可以使您工作的空间清洁与安全。重型14级别钢板的护罩可容纳加工产生的切削和冷却液。它配有一个双开门以及开放式顶篷,便于加工大的零件。这个选项同时包括容量为80加仑的冷却液系统以及双螺旋式排屑系统。
• 30 hp (22 kW), 10K geared-head spindle:
This 10,000-rpm spindle for 50-taper machines provides a wide constant horsepower band, good low-speed torque for heavy cuts, and higher torque throughout the range above 500 rpm. (This option requires balanced tool holders with a G2.5 rating.)
强大的30马力(10KW)带齿轮箱主轴
50锥度的10,000转/分的主轴,能产生持久动力,低速运转大扭矩,以实现重切削,大扭矩运转时主轴转速近500转/分,此选项不能现场安装,需平衡刀具至G2.5级
• High-speed machining:
The HSM option provides a powerful tool to reduce cycle times and improve accuracy. Using a motion algorithm called ”acceleration before interpolation,“ combined with full look-ahead of up to 80 blocks, HSM provides fast contouring feeds without distortion of the programmed path. The Haas HSM option accepts ISO standard G code, and is a fraction of the cost of other high-speed controls.
• Hard disk drive & Ethernet interface w/USB support:
This option provides great flexibility in program transfer and storage. The 20 GB hard drive has ample storage space for program files, and the USB connection supports either a customer-supplied ZIP™ drive or flash memory device. The Ethernet component allows quick, easy data transmission between your Haas machine and a network or PC, and large files can be accessed by multiple machines. High-speed data transfers allow DNC of large files at up to 1000 blocks/sec. Ethernet interface works with Windows XP, ME, 2000 Pro & Server, NT 4.0, 98 and 95. IPX/SPX or TCP/IP protocol; easy setup from the control screen.
以太网选项
20GB硬盘提供了各项程序的巨大存储空间。可支持 ZIP™或闪存的接口。以太网可完成Haas机器与王网络或其它电脑间快速,简便的数据传输,大型文件可以被多台机器读取。可允许以每秒1000字组的速度对大型文件进行DNC。可用于Windows XP, ME, 2000 Pro & Server, NT 4.0, 98和95。IPX/SPX 或TCP/IP协议,可以方便地从控制屏幕设定。
标准规格标准规格100% ball bar testing ensures three-dimensional squareness and accuracy.
*Requires linear scales to achieve this accuracy.
Haas采用严格100%球杆测试.保证了每台机床的三维垂直度与精度.
需使用线性轨实现精度。
MACHINE DIMENSIONS, EC-3000机床尺寸
Note: Footprint drawing illustrates optional enclosure, which includes chip augers and
coolant system.
说明:以下是护罩选项的示意图,包括排屑器和冷却系统
SHIPPING DIMENSIONS
装运尺寸
托盘尺寸 276" x 142" x 125" (7010 x 3607 x 3175 mm)
重量 40,250 lb (18,257 kg)
WORK ENVELOPE, EC-3000机床剖面图
Note: Max swing dimensions assume optional enclosure.
说明:最大回转直径(假设可选护罩)
正视图
G = max swing with front doors closed and table centered on X
G =前门关闭时到X轴方向工作台中心最大回旋距离
H = max swing with front doors open and table centered on X
H =前门开启时到X轴方向工作台中心最大回旋距离
H1 = max swing with front doors open and X axis 2" right of center
(toward operator)
H1 = 前门开启时到X轴方向工作台右边第二中心最大回旋距离(朝操作者方向)
WORK ENVELOPE, EC-3000 (cont’d) 机床剖面图J = table surface to center of tool changer
J =工作台台面到刀库中心的距离
Note: Haas recommends anchoring all EC-3000 machines to a suitable foundation. Anchoring instructions and details can be found in Engineering document ES-0095.
LED Beacon Light
The Haas-designed beacon light uses two rows of ultra-bright LEDS that can be seen from anywhere in the shop. The LEDs generate very little heat and have a life expectancy of more than 10 years.
Color LCD Screen
Our full-color TFT LCD display is designed to work in the machine shop environment. The high-intensity, high-contrast LCD features a very wide viewing angle, and will not fade out in bright light. The panel is mounted behind anti-glare tempered glass for protection and easy viewing.
Multi-FunctionJog Handle
Most machines use the jog handle only to move the axes around. On Haas machines, the jog handle can also be used in other modes to cursor through the program for faster editing, override spindle speeds and feedrates, or scan through offsets, parameters, etc.
One-Button Features
Common multi-step functions, such as powering up in the morning or setting tool offsets, have been reduced to the push of a single button. Other often used functions, such as setting part zeros, homing the machine, setting the offset to centerline and resetting the tool turret, are also one-button commands.
Dedicated Closed System
Our goal is to provide Haas users with a robust, dependable control that is seamlessly integrated with the machine. Our closed system is not reliant on PC-based controls or third-party NC suppliers. When you call Haas, you get a company that takes full responsibility for the entire machine
Advanced Program Editing
A unique 性能 of the Haas control is an advanced program editor that allows the operator to edit programs in a dual-window format.
Dedicated Keypad
The Haas keypad has 131 keys. All common functions, including a full alphanumeric keypad, are clearly labeled for operator ease. If you have ever fumbled with hot keys, paging through screens looking for a specific function, then you will appreciate the simplicity of the Haas control. There are no encrypted codes to memorize, and many functions can be performed simply with the push of a single button.
Stainless Steel Bezel
Constructed of heavy-gauge T304 stainless steel with a fine-grained finish, the bezel of the Haas control not only looks great, it’s easy to clean, resists wear and will not corrode.