• Rigid tapping:
Synchronized tapping eliminates the need for expensive, floating tap holders, and prevents lead-thread distortion and start-thread pullout.
刚性攻丝
同步攻丝不再需要昂贵的浮动式攻丝夹头，同时防止了引导螺纹变形与螺纹口拉丝。
• High-speed machining:
The HSM option provides a powerful tool to reduce cycle times and improve accuracy. Using a motion algorithm called ”acceleration before interpolation,“ combined with full look-ahead of up to 80 blocks, HSM provides fast contouring feeds without distortion of the programmed path. The Haas HSM option accepts ISO standard G code, and is a fraction of the cost of other high-speed controls.
高速加工
Haas HSM高速加工选项为缩短循环时间和提高精度提供了强大支持。高速加工选项使用被称为“插补前加速”的运动算法，加上能够预读多达80个程序块，可以让您快速进刀加工时，不会存在已编程路径失真的风险。哈斯高速加工选项接受ISO标准G代码功能，且价格只是其它高速控制系统的一小部分。
标准规格
STANDARD MACHINE SPECIFICATIONS标准规格
机床尺寸
Machine depth is 64" (1626 mm), and requires
机床宽度为64" (1626 mm)
additional 35" (889 mm) to open rear service panel
要另加长35" (889 mm)需 开启尾部维修用后盖板
其它性能包括：
LED Beacon Light
The Haas-designed beacon light uses two rows of ultra-bright LEDS that can be seen from anywhere in the shop. The LEDs generate very little heat and have a life expectancy of more than 10 years.
LED警示灯
Haas设计的这一信号灯有两排超亮度LED - 12个绿色的和12个红色的 - 非常醒目，在车间的任何地方都可以很容易地看到。LED热量产生少，预期使用寿命达10年以上。
Color LCD Screen
Our full-color TFT LCD display is designed to work in the machine shop environment. The high-intensity, high-contrast LCD features a very wide viewing angle, and will not fade out in bright light. The panel is mounted behind anti-glare tempered glass for protection and easy viewing.
彩色液晶显示器
机床配置的彩色TFT LCD显示器设计适用于车间工作环境。高亮度、高对比度的液晶屏提供了非常宽的视角，且不会在明亮的光线下变淡。屏幕表面装有防眩强化玻璃加以保护。
Multi-FunctionJog Handle
Most machines use the jog handle only to move the axes around. On Haas machines, the jog handle can also be used in other modes to cursor through the program for faster editing, override spindle speeds and feedrates, or scan through offsets, parameters, etc.
多功能手轮
大多数机床的手轮只用于移动轴。Haas机床的手轮还可用于在其它模式环境中移动光标、快速编辑程序、改变主轴速度及进给速度或浏览偏置、参数等。
One-Button Features
Common multi-step functions, such as powering up in the morning or setting tool offsets, have been reduced to the push of a single button. Other often used functions, such as setting part zeros, homing the machine, setting the offset to centerline and resetting the tool turret, are also one-button commands.
一键性能
通常需多步进行的操作，如开机和设置刀具偏置，现在只需按一个键。其它经常用到的功能，如设置工件零点、机床回零和选择下一刀具均可采用一键式操作命令完成。
Dedicated Closed System
Our goal is to provide Haas users with a robust, dependable control that is seamlessly integrated with the machine. Our closed system is not reliant on PC-based controls or third-party NC suppliers. When you call Haas, you get a company that takes full responsibility for the entire machine.
Advanced Program Editing
A unique feature of the Haas control is an advanced program editor that allows the operator to edit programs in a dual-window format.
先进的编程系统
Haas控制系统的一个独特之处是其先进的编程系统，允许操作者在双窗口模式下编辑程序。
Dedicated Keypad
The Haas keypad has 131 keys. All common functions, including a full alphanumeric keypad, are clearly labeled for operator ease. If you have ever fumbled with hot keys, paging through screens looking for a specific function, then you will appreciate the simplicity of the Haas control. There are no encrypted codes to memorize, and many functions can be performed simply with the push of a single button.
专用键盘
Haas键盘有130多个键。所有通常按键，包括完整的字母键盘，都被明确标明，方便操作者使用。如果您曾费劲地寻找快捷键，在屏幕上逐页寻找某一特定功能，那么您将会发现Haas控制系统的简易性。不需要记忆任何密码，许多功能只需按一个键就可以执行。
Stainless Steel Bezel
Constructed of heavy-gauge T304 stainless steel with a fine-grained finish, the bezel of the Haas control not only looks great, it’s easy to clean, resists wear and will not corrode.
不锈钢框
Haas控制器的外框采用高规格T304不锈钢，且经过精加工。不但外形美观，而且易于清洁，耐磨损，抗腐蚀。（并非所有机床都提供）
Visual Quick Code Programming System:
Haas’ unique Visual Quick Code is a conversational programming system that uses a graphical interface to make creating simple G‑code programs nearly effortless. VQC prompts the operator to fill in part dimensions, speeds and feeds, etc., and then generates the correct G-code program for the operation. VQC also includes standard Quick Code, in which English commands, such as “spindle forward,” are selected by the operator from a menu, and the corresponding G or M code (in this case M03) is then inserted into the program.
可视快速代码编程系统
可视快速代码采用图形界面来编制简单的Ｇ代码程序。一旦您选择了符合您需要的模板，它就会要求您填写零件尺寸、速度、进给等。一旦信息填写完成，可视快速代码会为相应的加工生成正确的Ｇ代码程序。可视快速代码选项也包括标准快速代码，采用人机对话模式。操作者可以从菜单与相应的代码中选择“spindle forward” 等英语指令，这种情况下是M03,然后插入到程序中去。
哈斯直观铣床软件
TM-1的标准配置都带有哈斯直观铣床系统－一种人机对话式操作系统，可使您切削零件和创建加工零件的程序的操作变得更简便。使用全液晶图形界面控制器让操作者只需输入必要的指令就能轻松进行例如设定刀具和工件偏置，钻孔以及循环攻丝，圆形何六角形型腔铣，雕刻等的加工。而完成这些加工，您无需掌握G代码编程知识。操作简单到您只需输入刀具型号，坐标系，进给速度，主轴速度，切削深度等机床基本信息便可轻松完成。一旦信息被输入，机械师就只需简单地推动循环加工起点，机器就能完成您预想的加工。而它的纪录功能可保存多种操作，以备下次加工类似的零件之需。
For extreme flexibility, the TM-1 operates in three modes: manual,
combined manual/CNC and full CNC.
提到这种机床的灵活性，TM-1有三种操作模式：手动， 手动与全数控结合，全数控。
机床特性和优势
可视快速代码编程系统
淬硬钢线轨
完全第四轴
快速，可靠的10刀位侧刀库
其它性能包括：
哈斯直观铣床软件
