• 1400-ipm (35.6 m/min) rapids:
High-pitch ballscrews and high-torque, brushless servo motors on all axes provide rapids of 1400 ipm to keep non-machining time to a minimum. And with cutting speeds of up to 833 ipm (21.2 m/min), cycle times are significantly reduced.
• Massive cast-iron construction:
All Haas CNC machines are built utilizing American-made cast-iron components, which provide up to ten times the damping capacity of steel. Haas castings are internally reinforced with numerous heavy ribs to resist flex and damp vibrations, and each one is thoroughly inspected to ensure it is free of flaws.
• Hardened-steel bearing packs:
Haas uses hardened-steel bearing packs rolling on hardened-steel ways. Built using the same precision grinding technology utilized in bearing manufacturing, they feature zero clearance and full load-carrying capacity in all directions.
Haas uses only premium-quality ballscrews and guides that meet the highest quality standards in the industry. Haas ballscrews are anchored at both ends and pre-tensioned, then inspected for 100% parallelism to the axis guides.
• 100% ball bar testing before shipping:
Haas uses a stringent ball bar test that not only checks linear accuracy, but also the machine geometry. This ensures the three-dimensional squareness and accuracy of each machine.
• Programmable coolant nozzle:
Another unique time-saving feature from Haas. We noticed operators were constantly opening the doors of the machine to readjust coolant lines. P-Cool is a multi-position programmable nozzle that automatically directs coolant precisely at the part. The position of the nozzle is controlled via the program, saving operator time by eliminating constant adjustments.
• Remote Jog Handle:
Can be used to move all axes remotely during setup, as well as cursor through programs for faster editing, or scan through offsets, parameters, etc. When running a program, the remote jog handle can be used to override spindle and feedrate commands in 1% increments for the utmost in control. CYCLE START and FEED HOLD buttons allow the operator to single-block through a program from a vantage point closer to the part.
遥控手轮
遥控手轮可以在设置时,用来远程移动所有轴设置,以及在程序中作为光标来更快地进行编辑,或以偏置量,参数等来搜索。当运转一个程序时,遥控手轮可以用来改变主轴倍率和进给倍率,可控范围从1%倍率到极限。Cycle start 和 feed hold 按扭允许操作者在靠近工件的一个有利位置单步执行程序。