• Powerful 20-hp (15 kW) inline direct-drive spindle:
This unique, Haas-designed direct-drive system couples the motor directly to the 8000-rpm, 40 taper spindle, for less vibration, less heat and less noise than belt-drive systems. This improves surface finishes and thermal stability, and also quiets operation. The 20-hp (15 kW) Haas vector drive produces plenty of low-end torque, as well as the rpm necessary for high-speed machining.
强大的20马力（15KW）同轴直接驱动主轴
Haas独特设计的直接驱动系统可使40锥度主轴转速达到8000转/分，同时与皮带驱动系统相比，它振动更小，热量更少，噪音更低。它大大提升了零件表面处理效果，稳定加工时所产生的热量，保持低噪音加工。20马力（15KW）Haas矢量驱动主轴可在低扭矩时完成高速加工。
• 70-pocket side-mount tool changer:
The Haas-built 40-taper SMTC stores tools outside of the work envelope, to free up valuable workspace for large fixtures. A quick-change double-arm gripper swaps tools in 2.1 seconds (chip-to-chip time 3.7 seconds).
70刀位侧挂式刀库
Haas40锥度侧挂式刀库位于整机的侧面，减少大型机器与转台的占地空间。快速双换刀臂钳可在2.1秒完成换刀（3.7秒切屑到切屑）。
• Massive cast-iron construction:
All Haas CNC machines are built utilizing American-made cast-iron components, which provide up to ten times the damping capacity of steel. Haas castings are internally reinforced with numerous heavy ribs to resist flex and damp vibrations, and each one is thoroughly inspected to ensure it is free of flaws.
重型铸铁结构
所有Haas CNC机床都使用美国制造的铸铁构成, 它的减震能力超过钢铁十倍.Haas铸铁件内配有加强筋,以抗弯减震,同时,所有Haas铸铁件在加工前都要进行彻底检验,以确保没有裂纹.
• 100% ball bar testing before shipping:
Haas uses a stringent ball bar test that not only checks linear accuracy, but also the machine geometry. This ensures the three-dimensional squareness and accuracy of each machine.
出厂前100%球杆测试
Haas采用严格球杆测试仪来检查线性精确度与机床的几何精度.这保证了每台机床的三维垂直度与精度.
以太网选项
20GB硬盘提供了各项程序的巨大存储空间。可支持 ZIP™或闪存的接口。以太网可完成Haas机器与王网络或其它电脑间快速，简便的数据传输，大型文件可以被多台机器读取。可允许以每秒1000字组的速度对大型文件进行DNC。可用于Windows XP, ME, 2000 Pro & Server, NT 4.0, 98和95。IPX/SPX 或TCP/IP协议，可以方便地从控制屏幕设定。
• Full 4th axis:
The fully integrated 4th axis provides simultaneous 4-axis motion for complex work: Program any angle, or perform circular cuts on the outside of your parts. The Haas 4th axis runs directly from the HMC’s control, for seamless operation and uncomplicated programming.
完全第四轴选项
完全第四轴选项可完成4轴联动的复杂工作。您可以编辑任何角度，实现零件外部的循环式加工。卧式加工中心的第四轴可无间断操作简单编程。
• 12,000-rpm, 30-hp (22-kW) inline spindle :
With the same design, this optional spindle has all the advantages of the standard spindle plus even more power and higher speed. The Haas vector dual drive system yields plenty of low-end torque, as well as the speed necessary for high-speed machining.
12,000转/分 30马力（22KW）同轴驱动主轴
此选项具有大马力高转速标准主轴的一切优点。Haas矢量双驱动系统可实现小钮矩下高速加工的需要。
A = max part clearance diameter during pallet change
A=交换托盘时零件间的最大间隙直径
B = max part diameter; C = max part height
B=最大零件直径 C= 最大零件高度
G = Y travel G= Y轴行程
J + K = X travel (20") + probe access+K= X轴行程(20") + 滑动距离
L = Z travel L= Z轴行程
六托盘组
螺旋式排屑器
淬硬钢线轨
高速加工
