Haas uses hardened-steel bearing packs rolling on hardened-steel ways. Built using the same precision grinding technology utilized in bearing manufacturing, they feature zero clearance and full load-carrying capacity in all directions.
Haas uses only premium-quality ballscrews and guides that meet the highest quality standards in the industry. Haas ballscrews are anchored at both ends and pre-tensioned, then inspected for 100% parallelism to the axis guides.
• Through-spindle coolant:
The Haas through-spindle coolant options improve tool life and allow higher speeds, deep hole drilling and blind pocket milling. The result is high productivity and reduced cycle times. Haas engineers have designed a special seal which disengages when the system is not in use. This exclusive design feature extends the life of the system. The standard TSC option provides 300 psi (20 bar) at a flow rate of 1.5 gallons (5.7 L) per minute, and 250 psi (17 bar) at 4 gpm (15 Lpm). The 1000 psi option has a max flow rate of 6 gpm (23 Lpm), and requires separate (customer-supplied) 3-phase power. In both systems, actual pressure will vary with the diameter of the coolant passages in the tool.
主轴内冷
Haas主轴内冷选项延长了刀具的寿命,允许更高的切削速度,深钻孔以及盲腔铣削。从而提高产能,减少运行时间. ,Haas工程师们设计了一种特殊的密封装置,可以在该系统不使用时断开.这个绝妙的设计延长了系统的使用寿命.标准TSC选项在1.5加仑/分钟流量时提供达300-psi的压力, 而在4加仑/分钟时提供250psi压力.1000psi选项可达最大流量达6加仑/分钟.同时需要分离的(用户提供)3项电源.1,000-psi的压力。两种系统的实际压力因刀具内冷通道直径不同而异。
• Programmable coolant nozzle:
Another unique time-saving feature from Haas. We noticed operators were constantly opening the doors of the machine to readjust coolant lines. P-Cool is a multi-position programmable nozzle that automatically directs coolant precisely at the part. The position of the nozzle is controlled via the program, saving operator time by eliminating constant adjustments.
• 24-tool side-mount tool changer:
More tools, more work space and faster tool changes – together, these advantages will increase productivity and reduce setup times. Locating the tool changer outside of the work envelope frees up additional workspace, while adding greater flexibility when using large fixtures or rotary tables.
24刀位侧挂式刀库
侧挂式刀库提供更多刀具,更大工作空间与更快的换刀速度,这些优势将提高您的产能,减少准备时间.侧挂式刀库位于机床外壳之外,当与转台或大型夹具共同使用时,可释放更多空间,提供更大的灵活性.