APC自动托盘交换器
HaasAPC自动托盘更换器是侧式装载托盘交换器，使用两个19" x 40" (483 x 1016 mm)钢制托盘。重载、铸铁床身对立式加工中心来说，安全。可靠稳定，三点式调平系统确保机器稳定。Haas自动托盘更换器使夹具安装与零部件更换等非加工类任务可以在一个 托盘上进行，同时在另一个托盘上进行零件加工。每个托盘可以设置不同的多重零部件操作。同样不同的、多重的、短时间操作运行程序在每个托盘。关于交换器装载，可以实现无人操作。
Haas uses only premium-quality ballscrews and guides that meet the highest quality standards in the industry. Haas ballscrews are anchored at both ends and pre-tensioned, then inspected for 100% parallelism to the axis guides.
• Hardened-steel bearing packs:
Haas uses hardened-steel bearing packs rolling on hardened-steel ways. Built using the same precision grinding technology utilized in bearing manufacturing, they feature zero clearance and full load-carrying capacity in all directions.
淬硬钢线轨
Haas使用淬硬钢轴承组在淬硬钢导轨上滚动.采用与轴承制造相同精度的磨削技术,这些轴承组的特点是所有方向的零间隙和满承载能力.
主轴内冷
Haas主轴内冷选项延长了刀具的寿命，允许更高的切削速度，深钻孔以及盲腔铣削。从而提高产能,减少运行时间. ,Haas工程师们设计了一种特殊的密封装置,可以在该系统不使用时断开.这个绝妙的设计延长了系统的使用寿命.标准TSC选项在1.5加仑/分钟流量时提供达300-psi的压力， 而在4加仑/分钟时提供250psi压力.1000psi选项可达最大流量达6加仑/分钟.同时需要分离的(用户提供)3项电源.1,000-psi的压力。两种系统的实际压力因刀具内冷通道直径不同而异。
• Programmable coolant nozzle:
Another unique time-saving feature from Haas. We noticed operators were constantly opening the doors of the machine to readjust coolant lines. P-Cool is a multi-position programmable nozzle that automatically directs coolant precisely at the part. The position of the nozzle is controlled via the program, saving operator time by eliminating constant adjustments.
• High-speed machining:
The HSM option provides a powerful tool to reduce cycle times and improve accuracy. Using a motion algorithm called ”acceleration before interpolation,“ combined with full look-ahead of up to 80 blocks, HSM provides fast contouring feeds without distortion of the programmed path. The Haas HSM option accepts ISO standard G code, and is a fraction of the cost of other high-speed controls.
高速加工
Haas HSM高速加工选项为缩短循环时间和提高精度提供了强大支持。高速加工选项使用被称为“插补前加速”的运动算法，加上能够预读多达80个程序块，可以让您快速进刀加工时，不会存在已编程路径失真的风险。Haas高速加工选项接受ISO标准G代码功能，且价格只是其它高速控制系统的一小部分。
• Automatic chip auger system:
This auger-style chip conveyor automatically removes chips from the enclosure, wrings out coolant and discharges them at a 27-inch (685 mm) height. Our intelligent system senses torque loads and reverses direction automatically if a jam should occur.
自动排屑系统
当切屑堵塞达到27-inch (685 mm)高度时，螺旋推进式的排屑器自动从机器中清除切屑，并拧出冷却剂。我们的智能系统会感应到扭矩负荷，并在堵塞发生时反转。
• Remote Jog Handle:
The remote jog handle can be used to move all axes, as well as edit programs, override spindle speeds and feedrates, single-block scroll through programs – and much more.
遥控手轮
遥控手轮可以用来移动所有轴,以及编辑程序,控制主轴速度与进给速度,在程序中滚动过每个字组等等.
标准规格VF-4APC
运输尺寸
机床尺寸,
SIDE VIEW
侧视图
正视图
Guarding standard in CE countries; optional elsewhere.
重型铸铁结构
快速,可靠的刀库
双支承滚珠丝杠
出厂前100%球杆测试
高精度两级变速齿轮箱
主轴内冷
可编程冷却喷嘴
可视快速代码编程系统
