Caddy® Tig 2200i AC/DC
Compact and portable inverter for AC/DC TIG welding, with HF or LiftArc™ start, and MMA.
Durable and impact resistant design with OKC 50 cable connectors.
Easy to operate.
Digital display for settings.
Plate thickness setting for TIG (TA33 AC/DC). Set the plate thickness and the machine will control the welding parameters.
Adjustable slope down and gas post-flow (TA33 AC/DC).
DC Pulsed TIG (TA34 AC/DC) giving increased control of heat input and weld pool.
Two memories (TA34 AC/DC) for storing of settings.
Micro Pulse (TA34 AC/DC) minimising heat affected zone especially on thin material.
Adjustable slope up/down and gas post-flow (TA34 AC/DC).
Remote control possibility.
ArcPlus II regulator for better MMA welding characteristics. Higher weld quality with less after treatment.
Alll types of material, including aluminium, and thickness up to 5 mm.
Can operate with extra mains cables, over 100 m, thanks to the built-in PFC circuit.
IP 23 - designed for outdoor use making it safe on all work sites.
Delivery includes
3 m of mains cable, 2 m of gas hose with two hose clamps. Return cable 3 m incl. earth clamp.
Caddy® Tig 2200i AC/DC, TA34 AC/DC
External dimensions, LxWxH, mm 418x188x345
Weight, kg 15
Enclosure class, protection IP 23
Mains supply, V/Hz 230/1 50/60
Fuse, slow, A 16
Mains cable, Ø mm2 3 x 2,5
Max output at 20% duty cycle, A 220/18,8
Max output at 60% duty cycle, A 150/16,0
Max output at 100% duty cycle, A 140/15,6
Open circuit voltage, V 46-60/<35
Power factor at max current 0,99
Efficiency at max current 66
Current range TIG DC, A 3-220
Current range MMA DC, A 4-160
AC balance, % 50-98
Slope up, s 0-10
Slope down, s 0-10
Gas pre-flow, s 0-5
Gas post-flow, s 0-25
