Set-up Time
<1.5S (220Vac input, Full load)
<1.0S (220Vac input, Full load)
Hold up Time
>20mS(220Vac input, Full load)
Temperature Coefficient
±0.03%/℃
Overshoot and Undershoot
<5.0%
INPUT
Voltage Range Note 2
176Vac~264Vac
Frequency Range
47Hz~63Hz
Efficiency ( Typical)
79% at 220Vac input
79% at 220Vac input
AC Current (max.)
1.2A
1.0A
Inrush Current (Typical)
50A@220Vac Cold start
40A@220Vac Cold start
Leakage Current
Input—output:<0.25mA Input—PG:<3.5mA
PROTECTION
Over Power
105%~165% of rated output current, auto recovery
Over Current
105%~165% of rated output current, auto recovery
Over Voltage
115%~150% of rated output voltage
,
Shorted Circuit
Long-term mode, auto recovery
ENVIRONMENT
Operating amb. Temp. & Hum.
0℃~50℃; 20%~90%RH No condensing
Storage Temp. & Hum.
-25℃~85℃; 10%~95%RH No condensing
SAFETY &EMC
Safety Standards
/
Withstand Voltage
Primary-Secondary:1.5KVac; Primary-PG:1.5KVac; Secondary-PG:0.5KVDC
Isolation Resistance
50M ohms
OTHERS
MTBF (MIL-HDBK-217F)
More than 100,000Hrs (25℃, Full load)
Dimension (L*W*H)
129×98×38mm
Connection
7P/8.025mm barrier terminal block
Cooling method
Cooling by free air convection
NOTE
All parameters NOT specially mentioned are measured at rated input, rated load and 25℃ of ambient temperature.
AC input range selected with switching.
Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor.
