Our full-featured, SL-V pumps are available in more sizes and with new “Cutting Edge” options available only from KMT Waterjet. These pumps are the easiest to maintain and the most advanced STREAMLINE? pumps ever offered. Seals last over 1,000 hours, depending on pressure and water quality – longer than any other system – for continuous operation for the most demanding production schedules. Easiest to Maintain
? Single Intensifier per Pump – 60,000 psi is produced with just one intensifier, delivering lower maintenance costs, and quieter operation with fewer parts.
? Larger Plunger – The longer, slower strokes of the ceramic
plunger move more water with each stroke, providing more
uptime and longer seal life.
? “Quick Release” Plunger – Exclusive plunger removal
design simplifies removal. Cartridge seal system design is
the fastest change-out design and provides a redundant
sealing system.
Most Intelligently Designed System
? High Tech Software –Standard system includes plunger
location control (plunger can be moved to a specific side to
facilitate maintenance), system capacity utilization (to show
if it is stroking at the maximum rate), hours of
operation (for either side, if redundant option is installed),
and more.
? Lower Noise Levels – The SL-V’s were designed to operate
below 77.5 dB(A), improving the environment for workers.
? See-through Top Covers – Inspection of the intensifier can
be done by looking through the top cover. In addition, both
sides can be open at the same time, allowing easier access.
? Dual Pressure Control – Pumps are equipped for a high
and a low setting. Ideal for brittle materials, the low setting is
used for piercing and the high setting for cutting. For even
more versatility, check out the Proportional Control option
under "Options".
? Threaded End Cap Retainers – End caps, high
pressure cylinder and hydraulic cylinder are all threaded
together, simplifying access to the seals. In addition, each
side of the intensifier can be disassembled independently of
the other.
? Booster Pump Protection – Sensors before and after the
booster pump assure that the flow of water is continual and
adequate. An important feature to protect your system.
Sophisticated Software
? Touch Control Panel – Rapid programming and troubleshooting.
? Upgradeable Communications – Remote access and
networking of multiple pumps are options which represent
huge potential for creating new opportunities.
? Multiple Language, Dual Pressure Control and many
more standard features.
