TOSMICRON-S4090IN的主要特点
1)通用４軸型Ｘ線检测装置
2)検测器東芝製4/2"Ｉ．Ｉ．
3)高速・高精度载物台搭載
4)线状计测、图像播放、记忆ＢＯＸ等多种功能
５）通用解析工具标准装备
Micro focus X-ray Fluoroscopic System
TOSMICRON-S4000 Ser ies
Electronics parts are getting smaller,
higher density printed circuit boards are
used more often in recent years and the
requirement for high-accuracy and highresolution
X-ray fluoroscopic system is
increasing.
This machine is a highly functional
inspection system developed to achieve
the user’s needs.
Easy and high speed operation!
Enable to mount with advanced flat
panel detector!
This system can perform high quality
inspection and get the result you
desire.
Overview
Features
◆Equipped with the latest micro focus X-ray generator has improved on system’s reliability
and resolution.
◆FD (flat panel type) and (I.I.type) are available for the TOSMICRON-S4000 series. Wide
dynamic range images free from distortion can be obtained by FD. High sensitivity, high
contrast images can be obtained by IN.
◆A newly developed high–speed and high-accuracy mechanism enable to move and to decide
the inspection points you need easily and smoothly. By this function, the total inspection time
is reduced drastically (50% comparing with our conventional system). With high-accuracy
mechanism, it shows the power on functions of auto table moving or measurement, and image
processing (subtraction etc.)
◆By equipped with the standard function of navigation, it enables high-speed moving to the
inspection point.
◆With auto-contrast adjustment function, X-ray images can be easily obtained.
TOSMICRON-S does not require any specific knowledge, because it comes with our Image
Replay and Repositioning as well.
Main specifications
Model TOSMICRON-S4090FD TOSMICRON-S4090IN TOSMICRON-S4130IN
Method Closed Tube Type
Tube
voltage /
Tube current
Maximum 90 kV，maximum 200 A Maximum 130kV,
Maximum 300A
X-ray
equipment
Focal spot
size
Nominal focal spot 5m
Sensor FPD (Photo acceptance
surface size 52 52 mm)
4/2-inch I.I.
Geometric magnification 68 times (on the table) 50 times (on the table)
Sample
table
410 360 mm，maximum load 2 kg
600 350 mm, maximum load 4 kg (Large type)
Stroke X-axis 350 mm，Y-axis 300 mm
X-axis 600 mm, Y-axis 300 mm (Large type)
Mass Approx. 790 kg Approx. 980kg
Inspection
chamber
X-ray
leakage
1 SV/h or less
Control software Toshiba original (Equipment control, image measurement,
linear scale function, replay function etc.)
Optional functions 2axes manipulator, Removable disk, Printer, software for sample auto-feed etc.
Dimensions 1150 mm (W) 1790 mm (D) 1095 mm (H)
Power supply AC100V 15A
Note: TOSMICRON-S4090IN and S4130IN are systems that use I.I.(image intensifier).
Just “one-click” enables
to decide the inspection
point instantly from a
whole image of the
sample or the
coordinates of X-Y
from the sample table.
(The right side image is
a chip capacitor which
is mounted on a mobile
phone.)
Flat panel detector not only can get
distortion-free images, but also more
than 300 times X-Ray images (monitor
magnification). Following is IC image.
Outline
Dimensions
Image Example
Navigation Function
Note: Regarding the transportation, installation, wiring, operation, maintenance, disposal and other related work of this equipment, a person
who is familiar with the laws and regulations authorized in your state and understands the principle and the functions of the equipment must be
in charge of the work.
Toshiba IT & Control Systems Corporation International Operations Group
