The Filled bottle inspector by X-ray (Level Eyeenable the beverage to inspect by X-ray but not by the optical type such as for the likeness. The X-ray used is very slight power and so not influence at all to the human body.
This equipment can be operated all by the touch panel and register in advance the kind of products individually. The contents of registeration can be entered the name of the products and also the judgement level for acceptable or not.
Therefore after registered these items the operation can start at once to inspect only with the selection of the kind of the products.
The required spaces to be installed is enough at the minimum, because of the design of all in one.
Feature
Enable the inspection in high accuracy.
As the bottle is inspected continuouslly during the bottle passing at the inspection point, the infulence of the waving of the liquid surface is averaged and the inspection in high accuracy enabled.
The high speed inspection of 2000BPM enable.
The sensor equipped with the scintillator in speedy response enable to inspect at the high speed of 2000BPM.
As for the material of the bottle any kind of PET, Aluminum and Steel available.
The registeration in advance of the products of 99kinds enable.
The leakage of the X-ray is smaller than 1micro. SV.
The leakage of the X-ray is 1micro. SV or smaller, drastically lower than required in the regulations.
Available two models, which one of them is the manual changing of the mold and another one is the automatic type.