TM-107系列落地式油压机特点：
1． 采用整体焊接的坚固开式结构可使机身保持足够钢性的同时拥有最方便的操作空间；
2． 压力、行程、保压时间、闭合高度均可按需求无级调整，也可设计为两段速度（空载快速，加压慢速），并可在使用行程内任意调整快速和工进的长短；
3． 另可选增加测力传感器及显示器，精确显示产品受力状况，达到所需工作目的；
4． 也可另选增加电子尺或光栅及显示器，精确显示油缸位移状况，达到所需工作目的。
适用范围：
本系列油压机适用于金属或非金属零件的压印、成型、浅拉深、整形及压力装配等；电机转子、定子压装，电子接插件、电器零件的压装，眼镜、锁模及五金零件的压制等。
出力10T15T 20T
工作面尺寸500*400 500*400 500*400
最大工作高度 400 400 400
油缸行程 200 200 200
油缸下降速度 65180 180
油缸加压速度 2030 30
油缸上升速度 75150 150
Features:
1. The solid open type structure of welding as a whole allows the press to keep enough rigidity and makes the press being operated in a most convenient operating space.
2. The pressure, stroke, dwell time and shut height can be adjusted infinitely according to requirements; it may be applicable to set two speeds (idling speed, low speed during pressurization). And the speed and time can be adjusted at will within the stroke.
3. The middle template can be additional adopted to add force imposed on the products so as to complete the undergoing work.
4. The electronic ruler or grating ruler and display can be additionally added to precisely display the situation of the oil cylinder displacement so as to complete the undergoing work.
Scope of Application:
Embossing, forming, shallow draw, shaping and pressure assembling of metal or non-metal parts; press fitting of motor rotors and stators, electronic connectors and electric parts; pressing of glasses, locked modes and hardware parts, etc.
