Knife gate valve MV The Stafsjo MV-valve is a robust and flexible designed knife gate valve which makes it very well suited for many applications within the process industry. Knife gate valve XV This is the new process industry knife gate valve from Stafsj? specially designed for good flow characteristics and simple maintenance. The XV-valve is a compact bi-directional valve with full bore. Knife gate valve HG The HG-valve is bi-directional seated and designed with a through-going gate. It is very well suited for contaminated pulp and reject handling in which tightness combined with reliability is demanded. Knife gate valve HP The HP knife gate valve is a high-pressure model of the HG-valve described above. The HP-valve is designed as the HG-valve and intended for the same applications but handles a higher working pressure and differential pressure than the HG. Knife gate valve HPT The HPT-valve is a HP-valve manufactured in titanium and designed for special applications in the paper mill bleaching system with mixers, bleaching towers and pumps. Knife gate valve RKO The RKO knife gate valve can solve most problems arising in combination with junk traps, heavy reject and cleaners. The valve counteracts clogging and choking due to its circular inlet and square outlet. Knife gate valve D2G The D2G-valve is specially designed for applications that require extremly fast opening or closing action. It is very well suited for contaminated media and reject handling duties. Knife gate valve BV Stafsj?’s valve for Waste water and sewer systems. The valve is a bi-directional full bore valve with fully flanged valve body up DN 300. Knife gate valve RKS This is a valve wiht a robust welded design and it is specially made for raw water intake and sludge handling, both wet and dry. Knife gate valve TV The TV-valve is a Transmitter Isolation Valve to be installed on a tank with a transmitter or sensor that requires short face to face dimensions .
