TM-102-F电池芯热压整形机特点：
1． 机架采用30*30*2.5mm不锈钢焊接而成，面板采用不锈钢板，其余部件均为镀硬铬处理，美观大方；
2． 采用3T增压缸作动，安全又环保，加热板采用黄铜板，导热性能好；
3． 控制系统可采用步进电机控制进出料，紧密滚珠丝杆传动，直线导轨保证平衡度，加热系统可采用PLC+温度模块控制，操作面板采用三菱五色触摸屏，生产效率，自动化程度，安全性，精密度均高；
4． 生产相应型号电池只需放入相应厚度模块即可批量生产，产品更换简便。
出力1.2-3T
发热面板尺寸400*300mm
最大开口高度350mm
闭合高度0
地面离工作面高度1030*650*1960mm
体积 220vac
温度范围 40-120
温度控制 正负三度
升温时间小于１５分
保压时间0-200sec
Features:
1. The rack uses the 30*30*2.5mm stainless steel welding to become, the kneading board uses the stainless steel plate, other parts are plate hard chromium prcessing, elegant appearance;
2. Uses 3T the turbo-charged cylinder to do moves, safe the environmental protection, the hot plate uses the yellow copper plate, the heat conduction perfor mance is good;
3. The control system may use step-by-steps the motor control to pass in and out the material, the close ball bearing lesd screw transmission, the straight line guide rail guarantee trim, the heating system may use the PLC+ temperature modular control, operates the kneading board to use the Mitsubishi five colors touchscreen, the production efficiency, the automaticity, the security, the accuracy is high;
4. Produces the corresponding model battery only to put in the corresponding thickness module volume production, the product replacement is then simple.
